SAFIERY SOLID STATE LITHIUM SAFEST LITHIUM BATTERY
Stackable 212Ah 12V 2,712Wh 48V
1) Higher Safety: The liquid electrolyte in traditional batteries creates safety hazards if over charging or electrical abuse. Theresult is thermal runaway and fire. Solid-state batteries have higher safety without this electroyte mass.
2) Higher Cycle Life: Because solid-state batteries use solid electrolytes, the cycle life is doubled. A minimum of 10,000 cycles at 80% depth of discharge is expected. 3) High energy density: As solid-state batteries use solid electrolytes, they do not need to use lithium-intercalated graphite anodes, but directly use metal lithium as the anode, which can reduce the amount of anode materials and increase the energy density of the entire battery. 4) Smaller size: The separator and electrolyte in the traditional liquid lithium battery account for nearly 25% of the entire battery mass. With the solid electrolyte, the distance between the positive and negative electrodes can be shortened to ten micrometers. The result is smaller battery dimensions and better quality control. 5) CAN Battery Management System (BMS) is Victron Compliant. Not only is the BMS in the SAFIERY Solid State Lithium VICTRON Energy Compliant, it is also Marine Regulations Compliant with Cell Min Max Voltages and Cell Temp Min Max Visible in Victron Display. 6) High Discharge rate: Solid State Batteries can discharge up to 10C. However, the BMS current rating limits discharge rates to 1C Continuous and higher for 2 secs.
10,000 Cycles 80% Depth of Discharge
5 Year Warranty CAN Connected
Videos & Buy
Specifications 12V and 48V Same Size Case
Nominal Voltage Nominal Capacity Parallel Connection Serial Connection BMS Circuit Protection Communication Cycle Life
12.8V, 51.2 212Ah, 53.1Ah (Either one 2,712Wh) Max. 40 units either Voltage 2 in Series for 24V 4S 200A at 12V, 16S 50A at 48V Over charge, Over discharge, Over current, Over temp, Short, Balance 1 x CAN Victron GX Compliant 10,000 cycles @80% DOD
Self Discharge
Less than 3% per month
100% @0.2C
Actual Photo Safiery Solid State Lithium showing Ceramic Wafers Contained in steel frame Inside ABS Case
98-99% @1C
Charge Voltage
14.4 0.8V, 57.6 to max 58V
Max Con. Charge Amps BMS Current Measure A Voltage at 0% SOC Max.Con.Discharge A Peak Discharge A Dimensions (mm) Approx weight Terminal Type Case Color/material
200A at 12V, 50A at 48V
0.3A, 0.1A
11.5V for 12V, 44V for 48V
200A for 12V, 50A for 48V 250A for 12V(2s), 60A for 48V (2s) 10V, 40V 420L x 252H x 150D mm (Same Case Size for 12V & 48V) 20 kgs M8
IP Rating Cell Type Charge Temp Discharge Temp Storage Temp
IP65 Automotive EV Grade A 3.2V 50Ah solid state wafer cell -5°C to 55°C
(28°F to 131°F) (-4°F to 140°F) (-4°F to 113°F)
-20°C to 60°C -20°C to 45°C
Nail Penetration Test Of Solid State Lithium Cells No Resultant Safety Dangers.
GB/T 31484-2015 Cycle Life Requirements And Test Methods Of Power Batteries For Electric Vehicles
IEC 62619-2022 Safety Requirements for Industrial Secondary Lithium-ion Cells and Batteries
GB/T 31486-2015 Electrical Performance Requirements And Test Methods Of Power Batteries For Electric Vehicles
GB/T 36276-2018 Lithium-ion Batteries for Electrical Storage
UL1973-2022 Batteries for Use In Stationary and Motive Auxiliary Power Applications
CAN BE CHARGED AT TWICE NORMAL VOLTAGE SAFIERY SAFETY SPECIFICATION CAN BE SHORT CIRCUIT FOR EXTENDED 60 MINS CAN SUSTAIN HEAT TO 130C CAN BE CRUSHED TO 200KN CAN BE PENETRATED BY 8mm NAIL at 25mm/s
Copyright Safiery 2025 Software Perpetual Licence granted by Safiery Pty Ltd Additional Licence available for Mild Hybrid Operation Made in Australia
safiery.com tap on chat bot
Safiery Pty Ltd, 45/8 Distribution Ct, Arundel 4214 Australia +61 7 210 22 55 2 ABN: 87 624 588 807
Page 1 Page 2Powered by FlippingBook