STLPO01-Manual

13 STLPO01 TANK LEVEL SENSOR (Fitted External Bottom) Description STLPO01 Pressure Sensor uses a high quality piezo-resistive pressure sensor (or flush ceramic sensor). It has an isolated stainless steel diaphragm as signal sensing element. Quality assembly procedures include: • Automatic testing, laser trimming compensated zero • Special sensitivity in wider temperature range • Amplifier circuit is in stainless steel housing, • Transforming sensor signal into standard output signal. Technical Specification Parameter Pressure range 0-500mm Water Measuring medium Fresh Water Signal output 0-5V Power supply 12V DC Overload 150%.F.S Burst pressure 200%F.S Accuracy (Linearity hysteresis repeatability) 1.5-2%.F.S Stability 0.2%F.S ± 0.05% Working Temperature -30°C~80°C Storage temperature -40°C~85°C Zero temperature drift ≤ 0.02%.F.S/ °C/year Net Weight 0.1kg Housing material 316 Stainless Steel Diaphragm material

Piezo-resistive Flush Ceramic

Insulate resistance >100M Ω @50V

Response time

≤10ms

Electronic Wire 3 Wires

Electronic connection Directly sealed cable IP67

Pressure connect port

G1/4” NPT male

Cable specs Water Proof

2m PE cable

Certificate approving CE Certificate

IP67

Electromagnetic radiation: EN50081-1/-2 Electromagnetic susceptibility: EN50082-2

EMC Standard

Dimension and Drawing (mm)

Electronic Wire Connections

Red Power Supply +

Blue or Green Power Supply - Blue or Green Signal Output -

Blue or Green Ground Wire

Yellow Signal Output +

COPYRIGHT © SAFIERY PTY LTD ALL CONCEPTS IMAGES AND TEXT IN THIS EBOOK ARE SUBJECT TO COPYRIGHT

Page 1

Powered by