Copyright Bruce Loxton No parts may be copied without express approval
Installation: Location When selecting the location for your new Kimberley Automatic Waterless Toilet, be certain to allow enough space behind and on both sides for the toilet to function and be serviced. Be sure that the lid will open fully. You must also be certain that the bowl has enough room to tilt rearward to allow for its removal and for the removal of the liquid tank.
If mounted against a wall or bulkunit, allow a minimum of 4cm between the toilet and the wall. It is necessary to allow adequate room for the hose con- nection and agitator handle. Both of these may be relo- cated to the opposite side of the unit if needed. In some space-restricted areas it may be necessary to offset the toilet to one side or even turn the toilet slightly to one side to allow for extra clearance. With the Automatic Turner and Timer attached, the width of the unit is 48cm . 5.1cm, to the left side of the unit (as you face it), is required to slide the bowl off the slip hinge for servicing the base.
In severely confined spaces, removing the mounting knobs and sliding the toilet away from the mounting location may be a more desirable method of servicing the unit.
- 8 -
Powered by FlippingBook