Suggested Channel Choices
Suggested Channel configuration
Guide Notes
Items to be Switched
Current per channels limited to 120W DO NOT USE FOR FRONT LIGHT BAR OR WORK LIGHTS > 120W Wire the first and second channel and test by selecting each channel and turning on and off on the app. Use 30A Channel of STAR-Power for lights > 120W but less than 400W. Maximum power all lights on at same time is 40A on STAR-Light and STAR-Rover. 1800W on STAR-Power. Multiple RGBW strips can be combined provided the maximum load when all turn on is < 400W Use 30A Channel of STAR-Power for single compressor of 30A or less. Common use is ARB Dual Stage which just activates a low power input remotely. Typically these are less than 10A and can be used of any STAR controller. If more than 10A then only on STAR-Power
Any for STAR-Light or STAR-Rov- er on negative or positive chan- nels. Only Positive for STAR-Power
Single Colour LED Light
1
2
Front Light Bar
STAR-Power
3
Side Work Lights
As per item 1 if less then 120W.
4
Rock Lights
As per item 1
5
RGBW Light
As per RGBW Setup
6
Compressor Single Stage
STAR-Power
STAR-Power or STAR-Light or STAR-Rover non dimmable channels
7
Compressor Dual Stage
STAR-Power or STAR-Light or STAR-Rover non dimmable channels
8
Water Pump
NEVER use any STAR controller, always wire direct to fridge. Jupiter has dedicated Anderson plug on rear for up to 3 fridges
Reason is there is too much risk someone accidentally turn fridge off on switch and ruins all the food.
Fridge
9
10
These are 15A so use 30A channel
Travel Buddy Oven
If these are less than 10A use any STAR controller. If more than this use 30A channel on STAR-Power If these are less than 10A use any STAR controller. If more than this use 30A channel on STAR-Power
11
Fans
STAR-Rover is 15A
Other 12V devices that are not lights
12
STAR-Rover is 15A
21
WWW.SAFIERY.COM
Powered by FlippingBook