Additional Notes:
Multiple Button Assignments You can assign up to 6 different buttons to a single channel. Clearing Bluetooth Settings To clear the Bluetooth settings for a specific channel: - Ensure the desired channel is selected and highlighted green . - Press the Erase BLE Data button. This will remove all selected Bluetooth devices associated with that channel.
Section 6: Trip Settings
The Trip Settings page allows you to configure and monitor the desired channel (1–12). Below are the settings you can adjust and the parameters you can observe:
Adjustable Settings:
1. Setting Threshold (Set Thr): Defines the maximum allowable current for the selected channel The default setting is 10 amps Adjust this value based on your requirements to prevent overcurrent damage
2. Setting Delay (Set Del): Specifies the time delay before the channel trips The default setting is 1000 milliseconds (1 second) Note: Ensure any adjustments are made in milliseconds
1. Trigger Count: Displays the number of times the channel has tripped 2. DIM %: Indicates the dimming percentage for the channel 3. Current: Shows the real-time current being drawn by the channel. Non-Adjustable Settings:
Powered by FlippingBook