Wire color
Pin Function Notes
Blue
6 Left camera trigger
Connects to an analog high signal, such as the left turn signal, to trigger the device to display the left side camera. Connects to an analog high signal to trigger the device to display the front camera. Ground wire for the camera trigger inputs.
Brown 7 Front camera trigger
Black
9 Camera trigger ground
Connecting Vehicle and Backup Cameras You can connect up to four analog vehicle cameras to the infotainment system for backup, left, right, and front cameras. 1 For each camera, route the camera's RCA analog video cable to the back of the stereo. You should clearly label each cable for reference when you are connecting them to the stereo. 2 For each camera, determine the analog high signal that should trigger the stereo to display the camera, and route a wire for that signal to the back of the stereo. For example, you can use a reverse signal to trigger the backup camera when the vehicle is put in reverse, or you can use turn signal to trigger a side mirror camera. 3 Connect each RCA analog video cable to the VIDEO IN connectors on the back of the stereo, as shown. Front camera Left camera Right camera Backup camera 4 Connect the analog high signal wire for the backup camera to the pink REVERSE wire of the power and speaker wiring harness ( Power and Speaker Wiring Harness , page 2). 5 Connect the analog high signal wire for each of the other cameras to the appropriate camera detect wire of the analog signal detect harness ( Analog Signal Wiring Harness , page 2). NOTE: If you do not want to trigger a camera automatically, you should leave that camera detect wire disconnected. Harness wire color Camera Blue Left camera Orange Right camera Brown Front camera Attaching the Display Adapter to the Dock (7-inch Models Only) You should attach the adapter to the dock before you install the dock in a dashboard. 1 Place the adapter on the front of the dock, aligning the four screw holes on the adapter with the dock.
2 Using the included screws , secure the adapter to the dock. The recommended torque applied to the adapter screws is 3.0 to 3.5 lbf-in. (0.34 to 0.40 N-m). 3 Adhere the adapter label to the front of the adapter. Dock Installation You must use the included bracket to install the device dock into a specific vehicle type. The product package includes the hardware required to attach the bracket to the dock. The product package does not include the hardware to attach the bracket to the dashboard or the dashboard panel. Installing the Bracket on the Dock for Mercedes-Benz ® Sprinter ™ Vehicles 1 Place each bracket on the dock, aligning the holes on the bracket with the holes on the dock.
2 Using the included screws , secure each bracket to the dock. The recommended torque you should apply to the screws is 5.0 to 6.0 lbf-in. (0.56 to 0.68 N-m). 3 Install the dock into the dashboard using the appropriate hardware (not included). 4 Attach the included bezel to the front of the dock. 5 If necessary, install all remaining dashboard components. Installing the Bracket on the Dock for Freightliner M2 Vehicles 1 Place each bracket on the dock, aligning the holes on the bracket with the holes on the dock.
2 Using the included screws , secure each bracket to the dock.
3
Powered by FlippingBook