Viewing a Vehicle Camera Before you can view a vehicle camera, a compatible camera must be connected to the stereo. Before you can view cameras automatically, you must enable camera auto-display options ( Enabling Camera Auto-Display , page 22). 1 Select an option to view a vehicle camera: • To automatically show the backup camera, place the vehicle into reverse. • To automatically show a side-mirror camera, activate the vehicle turn signal. NOTE: This option is typically available only as a manufacturer option on select vehicles, and may not be available on your vehicle. • To manually show the backup camera, select > Camera . The vehicle camera view appears on the screen. 2 If available, select to mute or unmute audio from the camera microphone. TIP: If the vehicle camera microphone is connected and this option is not available, verify the microphone is enabled ( Enabling the Vehicle Camera Microphone , page 22). 3 Select an option to resume normal operation: • Take the vehicle out of reverse. • Deactivate the vehicle turn signal. •Select . Enabling Camera Auto-Display You can enable or disable auto-display features for compatible vehicle cameras. 1 Select > Camera > > Auto-Display . 2 Select a camera. Flipping the Camera Image In some installation situations or when performing reverse maneuvers, you can reflect the camera image, similar to the view in a rearview mirror. 1 Select > Camera > > Mirror Video . 2 Select a camera. Enabling the Vehicle Camera Microphone Before you can enable the vehicle camera microphone, it must be connected to the Aux2 input on the stereo. If the connected vehicle camera includes a microphone, you can enable or disable the microphone in the camera viewer. Select > Camera > > Mic Installed . When the microphone is enabled, appears on the camera screen. Traffic NOTICE Garmin is not responsible for the accuracy or timeliness of the traffic information. Your device can provide information about traffic on the road ahead or on your route. You can set your device to avoid traffic when calculating routes, and to find a new route to your destination if a large traffic delay occurs on your active route ( Traffic Settings , page 25). The traffic map allows you to browse the map for traffic delays in your area. To provide traffic information, your device must be receiving traffic data.
2 Select an option: • To set the IP address, select IP , and enter the IP address. • To set the subnet mask, select MASK , and enter the subnet mask. NOTE: The subnet mask must match all other devices on the network to work properly. A typical subnet mask is 255.255.255.0. • To set the default gateway IP address, select GATEWAY , and enter the gateway IP address. NOTE: The default gateway is typically set as the IP address of the DHCP server on the network. 3 Select Save . Resetting Network Settings You can reset all network settings for this stereo to the factory default values. Select > > > > NETWORK > RESET > YES . Additional Stereo Control Options Fusion-Link Wireless Remote Control App You can use the Fusion-Link remote control app on your compatible Apple or Android device to adjust the stereo volume, change the source, control playback, select and manage radio presets, and adjust some stereo settings. The app communicates with the stereo using a wireless connection to the mobile device. You must connect your compatible device to the stereo using Bluetooth or Wi ‑ Fi technology to use the app. For information about the Fusion-Link remote control app for compatible Apple or Android devices, go to the Apple App Store SM or the Google Play ™ store. Resetting the Stereo Settings You can reset all of the stereo features and settings to the factory default settings. Select > > > > UPDATE > FACTORY RESET . Vehicle Cameras WARNING This device is intended to enhance the situational awareness when used properly. If used improperly, you could become distracted by the display, which could lead to an accident causing serious personal injury or death. Only access the information displayed on the device with a glance. Always maintain awareness of your surroundings and do not stare at the display or become distracted by the display. Focusing on the display could cause you to miss obstacles or hazards. Use the device at your own risk. The stereo can show live video and audio from connected vehicle cameras, such as backup cameras or side-mirror cameras. If your vehicle cameras and stereo were included with the new vehicle, the cameras are already connected and configured by the manufacturer. If you are installing your own backup camera kit, you must connect the camera video to a video input on the back of the stereo, and the camera microphone to the Aux2 input (if applicable). To show the camera automatically, you must connect the camera to a camera trigger wire. For more information about the stereo connections, see the Vieo Series Installation Instructions .
22
Vehicle Cameras
Powered by FlippingBook