Tomorrow’s Technology Today ™ METEOR BATTERY PARAMETERS
Data Cabling Pin Outs • CAN cabling Connection is standard NMEA compliant cable Isolated with no power to CAN. • 120 Ohm Precision resistor inside Meteor Lithium. • Any Battery can be a “master” • CAN connection is to Victron Cerbo VE.CAN. Set baud rate at 250baud. • A “blue” Victron CAN plug may be required if this is the only CAN connection. Connection of multiple batteries: • TcoankneetchteorN.eTghaetriveeisPolunglywOitNhEthceonMn5ecatvioiantitohnatcafibtsle. and connect to the “in” of the leading battery Positive Fuse Plug in the lower • Repeat this process for multiple trains of batteries till all connected. • Press the “Reset/On” button at the Master Battery. It will come on and then the string of connected batteries follows. • If there is a fault in the string or a connection is not screwed in properly, the Master will flash a red light. Remote On/Off/Reset • Connect an M3 cable to the top connector IN of the “Master” battery. • Pins are the connections to close with free voltage contacts to remotely turn on.
Safiery Pty Ltd ABN: 87 624 588 807 45/8 Distribution Court, Arundel QLD 4214 (07) 210 22 55 3 safiery.com sales@safiery.com
Powered by FlippingBook