STAR-Power Description
LED Bar WiFi Status (STA > Cyan)
LED Bar Channel Status (on > red)
12 Manual Backup Buttons Direct to Outputs
Antenna
Positive Power 120A Nominal 150A Surge
NMEA 5 pin Connector (Reserved for 2nd CAN Not used in Ver 1)
Exit from Programming Button
Programming Button
Power Connectors Channel 1-6 30A Each
2 Wired Inputs CAN L and CAN H NMEA and VE.CAN Two ground Inputs (for redundancy)
Dimmable Outputs 7-12 10A Push Connectors
Postive Power ONLY. Negative Wires go to Ground or Battery Negative. They DO NOT return to the controller. 10A channels are dimmable. Backup buttons direct drive outputs overriding software commands.
6
WWW.SAFIERY.COM
Powered by FlippingBook