Star Range Digital Switching Operating Manual

STAR-LIGHT Description

LED Bar Channel Status (on > red)

SHARP EDGES

LED Bar WiFi Status (STA > Cyan)

Antenna

NMEA 5 pin Connector NMEA and VE.CAN

Programming Button

Exit from Programming Button

Outputs 1-6 10A Push Connectors Power 40A Outputs Can be Positive + Switch/Dim OR Negative Switch/Dim Outputs 7-12 10A Push Connectors

This very unique feature of either positive or negative selection on any channel gives the ultimate in installer flexibility. High end LED’s and generally dual colour LED strips that alternate colours along the strip are negatively switches and dimmed. RGBW LEDS are always negatively dimmed and switched. Individual LED’s can then be positively dimmed and switch. Just install all the LED’s and change the channel setting when you program. Its that easy. RGBW LED’s - up to TWO Set your colour using the Smartphone. Toggle between All White or Colour with double press of switches. For a RGBW light, R (red), G (green), B (blue), and W (white) are connected to channel 1, 2, 3, and 4, respectively. Similar to another RGBW channel 9, 10, 11, and 12.