Programming Channels
Programming is done in two parts: 1. Program the connected wired channels 2. Program the Switches to activate these wire channels It HAS to be done in this order.
There is a selection for each Channel of: + Dimmable + Non Dimmable - Dimmable
- Non Dimmable These match the physical device or LED you are switching
Programming Wired Channels STAR-Light and STAR-Rover
STAR-Light has 12 x 10A channels either +ve or -ve with 8 dimmable and a max of 40A overall. STAR-Rover has 4 x 15A channels either +ve or -ve with 4 dimmable and a max of 40A overall. (Image below is STAR-Light – STAR-Rover is similar but only 4 channels)
These channels represent the wiring position on the Phoenix plugs. For STAR-Light the first 4 and last 4 channels are dimmable. The middle 4 are not. For STAR-Rover all 4 channels are dimmable. The Green “dot” means the channel is turned “off”. If selected and turned “On” it will be red. Do a simple test and press “All On” to see all channels change to a red dot. The All off. If this operates as described you are on the right track and ready to program.
13
WWW.SAFIERY.COM
Powered by FlippingBook