Star Range Operating Manual copy

Programming RGBW

RGBW Channels Firstly select each of these 4 channels and set to -ve Dimmable. At the same time as this you can name the channel. This is good practice as you will then see on the screen which channels have not been programmed yet. Then, select RGBW on the screen. A block of 4 channels is shown in block colour <image of RGBW channel selection> For the correct colour selection from this app it is important to wire the RGBW light in this order in assending channel numbers. Start with R (for red) then G (for green) then B (for Blue) then W (for White) corresponding to the increasing channel number for the block of four selected. STAR-Light has 2 blocks of 4, STAR-Rover has 1 block of 4. For the second block or RGBW channels on STAR-Light, touch the left or right arrow and the screen selection will change in blocks of 4. Select the block at the other end of the channels layout and repeat the process above. Wire the channels and test by selecting each channel and turning on and off on the app.