Star Range Operating Manual copy

Programming CAN Keypads

CAN Keypads Ensure the STAR-controller is in programming mode with Left button pressed and deep blue LED on. Select the channel number the switch(es) will activate Then in the table select the keypad letter code. The reason for this is each keypad with a different letter has been programmed with a different CAN ID. You cant have 2 keypads with same CAN ID on same network. So if you have 4 keypads they all have to have a different letter code. They don’t need to be sequential. Just different. After selecting the keypad code, select the channel number using the convention above. Choose CANKeypad ID from options A-P, where each letter corresponds to a specific CAN Bus keypad Select a letter under Type, then choose the button (BTN ID) to control the selected channel. Ensure the channel you wish to configure is highlighted green before proceeding. As you do this the CANID and Button ID will display on the App so you know it is selected and will function.

Then if you are on a roll, just complete all wired cannels.

Then take out of programming mode by pressing the right button for 10 seconds. Then test the CAN Keypads ! Impressive hey!