For each sensor, you can find its name, graphical representation of the current temperature, and the numerical value of the current temperature in the chosen unit (°C or °F). Thermometer order, names, min. and max. ranges, and temperature units can be changed in the settings menu. 6.8.3 AC button
The AC button
is configured on the SPDU-52 as the third button by default (K3 on the cover scheme). Pressing the
button enables the AC (air conditioning).
Note: If the button is enabled, it will glow. 6.8.4 Aux button
The AUX button
is configured on the SPDU-52 as the fourth button by default (K4 on the cover scheme). By pressing
the button, you enable the output of an external device (e.g. speakers).
Note: If the button is enabled, it will glow. 6.8.5 Water pump button
The water pump button
, is configured on the SPDU-52 as the fifth button by default (K5 on the cover scheme). Pressing
the button enables the the water pump.
Note: If the button is enabled, it will glow. 6.8.6 Lights button
The lights button
is configured on the SPDU-52 as the sixth button by default (K6 on the cover scheme). Pressing the
button enables the lights.
Note: If the button is enabled, it will glow. 6.8.7 Inclinometer button
If you have an inclinometer installed, pitch and roll data is displayed on the screen if you press the inclinometer button .
Pitch is shown on the left side of the screen. The left side of the line represents the front of the vehicle, while the right side of the line represents the back of the vehicle. The pitch angle in degrees is shown below the line (positive value meaning front facing up and vice versa).
35
Powered by FlippingBook