6.9.3.1 Batteries
List of batteries that you have added to your Caravan Panel. By selecting a specific battery, you can view or change its settings or delete the battery if necessary. By selecting “Add new”, you can add a new battery.
If the battery connects only to a voltage sensor (without a current sensor), the battery name, approximate state-of-charge (SOC), and current-voltage are displayed. The calculation of SOC takes some time, so it may not be shown immediately after power-on. Up to three batteries without a current sensor can be shown on a single screen. If there are more, they are divided into two or more screens. If the battery is connected to a voltage sensor and a single current sensor (shunt), some additional data is displayed: time to charge, time to discharge, and electrical current (amps). SOC can be calculated more accurately if a current sensor is connected. Time to discharge is calculated by using an average consumption during a specific period. If there are more than one current sensor (shunt) connected to the battery (e.g. for monitoring different consumers or generators connected to the battery), their data (amps) is also shown on the battery page.
41
Powered by FlippingBook