6.9.3.3.1 Name Here, you can view or edit the temperature sensor name. 6.9.3.3.2 Type Here, you can view or change the temperature sensor type. Supported models: NTC 10K and NTC 5. These are 10kOhm and 5kOhm thermistors with a negative temperature coefficient. 6.9.3.3.3 Device The device and input to which the sensor is connected. For example: if the sensor is connected to the ST107 module and its input R1, select the option ST107 [serial number] R1. 6.9.3.3.4 Display priority This setting enables you to select one of the following display priorities: HIGH, MEDIUM, LOW, and HIDE. Use the display priority for ordering the thermometers on the screen of the Caravan Panel. When thermometers are shown on the screen, those with HIGH display priority are shown first (leftmost), followed by thermometers with MEDIUM display priority. Thermometers with LOW display priority are shown last. If you select HIDE, the level of this thermometer will not appear on the Temperatures screen (it will be hidden). 6.9.3.3.5 Range MIN The Caravan Panel shows the thermometer with a graphical representation (vertical bar), together with the current numerical value. This option defines minimum value (temperature) of the thermometer bar. 6.9.3.3.6 Range MAX The Caravan Panel shows the thermometer with a graphical representation (vertical bar), together with the current numerical value. This option defines maximum value (temperature) of the thermometer bar. 6.9.3.3.7 Calibration This setting enables you to calibrate the sensor value. If the displayed value is too high, you can use a negative calibration value (offset). If the displayed value is too low, you can use a positive calibration value (offset). 6.9.3.3.8 Delete With this option, you can delete the selected temperature sensor.
48
Powered by FlippingBook