Operation/Function
Touch Controls
L.E.D. Display
1. Ensure the power supply is connected and turned on 2. Switch On:
The display for each heat zone will illuminate as shown.
Touch the Power On/Off symbol until it beeps.
If no function activated after 10seconds system will switch to standby.
3. Heat setting
For each zone, touch the symbols to select required heat.
The heat setting is adjustable between 1 & 9 for each zone.
The heat setting is adjustable during cooking by touching either symbol.
4. Pan detection
Either heat zone will only function with a pan in place. When pan
removed or not present the display flashes & shows the following symbol.
5. Switch Off zone heating
For each zone, touch
When the zone is switched Off the display will illuminate as shown
With both Heat Zones switched Off, system is in standby mode.
symbol until ‘0’ appears on the display or touch and hold both
symbols.
6. Switch Off Induction Hob.
Touch the Power On/Off symbol until it beeps.
To Switch Off completely turn off power supply.
Illuminated display is blank.
Both zones are paused and their displays illuminate as shown.
7. Pause/Resume
To Pause touch until it beeps.
Pause function only operates for a period of 10minutes. After this period system automatically goes to standby.
To Resume touch
until it beeps and
then touch any other symbol to resume cooking on previous heat setting.
5
Powered by FlippingBook