SCOTTY AI 3.0 TUNING GUIDE
Scotty AI 3.0 or Scotty GEN 3 can be identifed through its lable (SCOTTY AI 3.0) or its version number (V3.x.x.x). Scotty AI 2.0 is labled as SCOTTY AI 2.0 and its version starts with V2.x.x.x. This guide can be used for tuning a SCOTTY AI 2.0. There are a few different you need to know: An interface may be slightly different
Scotty AI 2.0 does not have a Low Side Charging Algorithm For Scotty 1500 (1.5kW) harness do not have ALT TEMP V- wire, you need to connect temprature sense negative cable direclty to Scotty negative terminal
I. Quick check:
I. GND Scotty terminal is connected to ground II. + LS Scotty terminal is connected to alternator (+12V or +24V) III. +HS Scotty terminal is connected to a battery bank (+24V or +36V or +48V) IV. Enable is connected either to +LS or +HS (Please note that only Scotty AI 3.0 Enable can be connected to +HS) V. ALT SENSE 12V+ is connected to alternator (+12V or +24V)
VI. ALT TEMP V+ is connected to a temprature sense positive (red cable)
VII. ALT TEMP V- is connected to a temprature sense negative (black cable) VIII. CAN communication is connected to a CAN system (optional)
II. Scotty Wifi Access
We recommend to turn off auto connect function of a wifi network that your
Go to wifi, select a Scotty wifi Enter a Scotty wifi password: Scottyai@0
Go to a web browser: http://172.24.24.1
A token for scotty is: 11337777 (if required), refresh a web page after you update a token.
10
WWW.SAFIERY.COM
Powered by FlippingBook