SCOTTY AI 3.0 TUNING GUIDE
e) High side floating voltage
It is a floating voltage while Scotty charge from +LS to +HS.
Please carefully check a set up parameter for your battery. Different batteries have different float voltage. You can not enter a HS Float Volt is higher than a HS Max Charge Volt
f) High side maximum charge voltage
It is a maximum charge (obsorbtion) voltage for your +HS battery.
Wrong set up can cause a damage to HS battery!
g) Alternator Maximum Temprature
If your alternator temprature is higher than a set up number, Scotty will stop taking power from +LS to +HS to prevent a heating up alternator. When temprature of alternator is lower, Scotty will operate as normal.
Recommend set up is 100C but can be set at 120C for those vehicles that run very hot in the engine bay. RAM 2500/3500 run at 105C so need a maximum set point of 120C
h) Alternator current limit
This set up allows to limit a maximum power that Scotty can charge from +LS to +HS.
Recommend maximum set up for alternator current limit:
75A 120A 120A 150A 220A 220A 110A Maximum +HS current
Scotty Type 1.5kW: 12V-24V 1.5kW: 12-36V 1.5kW: 12-48V 3kW: 12V-24V 3kW: 12V-36V 3kW: 12V-48V 3kW: 24V-48V
8 15
WWW.SAFIERY.COM
Powered by FlippingBook