Scotty AI Installation and Support Manual

Please note a current limit set up can be varied depend on +LS voltage, however, do not set it up for Scotty work at higher than its rated power, 1.5kW for 1500 Scotty and 3kW for 3000 Scotty. For charging from +LS to +HS, maximum current for Scotty +HS is 40A for Scotty 1500 and 80A for Scotty 3000 . For 12V-24V Scotty used, please bare in mind the maximum +HS current while calculating a alternator current limit (+LS).

For example:

Scotty 1.5kW: 12-24V +HS voltage at 26V + LS voltage at 12.8V +LS current limit can be calculated: 26(V)*40(A)/12.8(V) = 81.25(A)

Please note while Scotty is running, +LS and +HS are varied.

i) Smart Alternator Trigger Voltage

Recommend seting for this parameter is 12.3V and 24.9V for 12V and 24V +LS Scotty, respectively.

However, keep this set up 0.3V lower than a Camping SetPoint

Keep feature in disable if you do not control a Scotty through a Feature In wire j) Feature in

If Feature In wire is connected for control Scotty working Enable need to be selected if you want to control Scotty by a positive control (+12V or +24V only); Enable Inverted need to be selected if you want to control Scotty by negative control (GND)

8 22