This interactive publication describes the best way to Install and setup Jupiter Cases
USER MANUAL
Tomorrow's Technology, Today
WWW.SAFIERY.COM
CONTENT
GENERAL
3
OVERVIEW
6
VICTRON GEAR LIST
7
SAFIERY GEAR LIST
8
VICTRON CERBO-S GX
9
STAR-Light SETUP
15
STAR-Light MANUAL
16
STAR-Tank
19
WIRING DIAGRAM
21
SAFETY INSTRUCTIONS
22
INSTALLATION
23
OPERATION, CONFIGURATION AND MONITORING
24
WARRANTY
33
CONTACT / SUPPORT
34
2
WWW.SAFIERY.COM
GENERAL
Introduction The Jupiter pack can be used as an integrated power conversion, battery charger, monitor, 12V power supply for off road vehicles. It is especially suitable for vehicles with smart alternators (a Euro 5 or 6 smart alternator), which often supplies charging voltage that is too low even with the engine running or in the event of a voltage drop over long cables, controlled charging is crucial. Controlled charging also protects the alternator in lithium systems from overloading, as the low impedance of lithium batteries results in a high alternator current. The Jupiter is set only to supply power when the engine is running. This is possible thanks to the integrated engine shutdown detection. This eliminates the need to adjust in-vehicle wiring or add an engine detection sensor to determine if charging can start. It also prevents the starter battery voltage from getting too low. The Jupiter is fully programmed and monitored using the VictronConnect App. This also includes remote access via VictronConnect-Remote (VC-R) when connected to a GX device (requires a GX device connection to the VRM Portal) via the integrated VE.Direct port, monitoring via the GX Remote Console or from a PC, Apple computer with macOS or Android device in conjunction with a VE.Direct to USB interface and VictronConnect. Discover all setting and monitoring options in the Setup & monitoring with VictronConnect [15] chapter and the VictronConnect manual. Silent while vehicle charging The heat is dissipated through natural convection, eliminating the need for a noisy cooling fan. Features Smart alternator compatibility It is common for vehicle manufacturers to install "smart" ECU (Engine Control Unit) controlled alternators to increase fuel efficiency and reduce emissions. Smart alternators provide variable output voltage and shut down when not needed. The Jupiter has an integrated mechanism that detects whether the engine is running (engine shutdown detection), so the charger is only activated when the alternator is supplying power. This ensures that the charger only draws power when the alternator supplies power. See the Engine shutdown detection [12] chapter for more information.
Separation of the starter battery and the service battery The Jupiter separates the starter battery from the service battery.
3
WWW.SAFIERY.COM
Comprehensive electronic protection The charger is protected against overtemperature (bottom plate >90 °C) by reducing the output power when the maximum product temperature is reached.
• Protected against overload • Protected against short circuit • Protected against excessive temperatures
Adaptive charging in four stages The Jupiter is configured by default for a four-stage charging process. • Bulk — Absorption — Float — Storage • Bulk During this phase, the Jupiter supplies as much charging current as possible to quickly charge the batteries. • Absorption When the battery voltage reaches the absorption voltage setting, the charger switches to constant voltage aka absorption mode. For lead-acid batteries, it is important that the absorption time is kept short during superficial discharges to avoid overcharging the battery. After a deep discharge, the absorption time is automatically increased to ensure that the battery is fully charged again. For lithium batteries, the absorption time is fixed, 2 hours by default. Fixed or adjustable modes can be selected via the battery settings. • Float During this phase, the battery is charged with a trickle charge voltage to keep it in a fully charged state. When the battery voltage drops far below this level, for example, due to a high load for at least 1 minute, a new charge cycle is activated. • Storage The battery voltage is maintained at the configured storage voltage, which is slightly reduced compared to the float voltage to minimise gassing and extend battery life whilst the battery is unused and on continuous charge. Flexible charge algorithm The Jupiter has fully programmable charge algorithms and eight pre-programmed battery settings. Configurable with VictronConnect. Adaptive Absorption Time In adaptive absorption time mode, the correct absorption time is calculated automatically. Configurable with VictronConnect.
4
WWW.SAFIERY.COM
Repeated Absorption To refresh the battery and prevent slow self-discharge while in storage stage over an extended period, a 1-hour absorption charge will automatically occur every 7 days (or as configured).
Adjustable charge current The charge current is adjustable with a minimum step size of 0.1A. Configurable with VictronConnect.
Low-temperature shutdown Prevents damage to lithium batteries by turning off the charger at low temperatures. Configurable with VictronConnect.
Input voltage lock-out Shut down the charger when the input voltage falls below the lock-out value and restart when the input voltage rises above the restart value. Configurable with VictronConnect.
Remote On/Off The inverter can be switched on and off remotely via the remote on/off connector or the VictronConnect App. Typical applications include a wired switch or a lithium battery with a Battery Management System (BMS) that has an ATC (allowed to charge) output. Distributed Voltage and Current Control (called DVCC) The Jupiter pack has DVCC built in. When a CAN BMS battery is used like the Safiery 200Ah Lithium, charging currents and voltages are then set automatically; thus, the internal bulk, absorption, and float algorithms are no longer used. Charging or discharging are stopped at low or high cell voltage or low temperature. This automates the whole charging process in an absolutely safe way and extends battery life. Monitoring locally via a GX device as well as remotely on the VRM Portal Monitor and control (on/off) the Jupiter via a wired VE.Direct connection from a GX device such as the Cerbo GX, Ekrano GX, or use a PC, Apple computer (requires macOS), or Android device in conjunction with VictronConnect. If the Jupiter is connected to a GX device with internet access, you can also monitor the Jupiter remotely via the VRM portal. Predefined widgets with all the necessary parameters are already available in the VRM portal. You can also create your own customised widgets.
Configuration and monitoring via VictronConnect App and Bluetooth
5
WWW.SAFIERY.COM
OVERVIEW
240V AC 15A Power Input Charges up to 1750W
2000VA Inverter/Charger Victron Multiplus II Auto-cutover
STAR-Light 10 Channel Dimmable LED Dual Colour + RGBW
50A DC DC Orion XC Auto-tunes to any Alternator
240V RCBO Protection MAX 9 Magnetic Highest Quality Off Road
Victron 5In Touch Screen Batteries, Solar, DC-DC, Tanks, Temps
1000W Solar Panel Ready Victron Smart Solar MPPT
STAR-Switch 8 Button Backlit Waterproof Double Press Dual Colour
Resettable Breaker Switches Better than Fuse
Double Flush GPO Switch is 12V Master or Case LED
Suite 12V USB Outlets Double USB A, Type C, QC, Cigarette Lighter
Tank, Temp - 4 Channels Each Alternator temp, Tanks
100A Battery - Amphenol Secure Click and Connect
200A Alternator - Amphenol Secure Click and Connect
2 Can - NMEA Secure Optional Battery, STAR-Switch, STAR-Touch
3 Anderson - Plug and Connect 20A Fridges, 50A Compressors, Solar in
290mm
560mm
6
WWW.SAFIERY.COM
VICTRON GEAR LIST
MultiPlusCompact Inverter
Combined inverter and charger in one elegant package. Its many features include a true sine wave inverter, adaptive charging, hybrid PowerAssist technology, plus multiple system integration features.
PowerControl
Yes
PowerAssist
Yes
AC Input
Input voltage range: 187-250V
Input frequency
50 Hz
Full technical information
Transfer switch (A) 30
MPPT 100/30 Solar Charge Controller
The MPPT gathers energy from your solar panels, and stores it in your batteries.
Max continuous load corrent
65A
Peak current
250A
Full technical information
Operating voltage range
6/35V
Orion XS DC-DC Converter
The Orion XS, engineered from the ground up, redefines DC-DC battery-to-battery charging. Ideal for dual battery systems charged by an intelligent alternator.
Input voltage range
9-17 V
Output voltage adjust range
10-17 V
Maximum constant short-circuit current
50 A
Continuous output power up to 40 °C
700 W
Full technical information
Maximum Efficiency
98.5%
Cerbo GX Communication Centre + GX Touch 50 Display
The Smart BatteryProtect disconnects the battery from non-essential loads before it is completely discharged (which would damage the battery) or before it has insufficient power left to crank the engine. Smart Battery Protect The SmartShunt is an all in one battery monitor, only without a display. You can conveniently read out all monitored battery parameters, like state of charge, time to go, historical information and much more via the Cerbo GX on the GX Touch display. Smart Shunt Battery Monitor This communication-centre allows you to always have perfect control over your system from wherever you are and to maximise its performance. Simply access your system via our Victron Remote Manage- ment (VRM) portal, or access it directly, using the GX Touch screen on the Jupiter case or the VictronConnect app thanks to its Bluetooth capability.
Full technical information
Full technical information
Full technical information
7
WWW.SAFIERY.COM
SAFIERY GEAR LIST
STAR-Light
CAN wired Bluetooth Wireless 10 Channel 20A Controller.
Up to Eight LED’s controlled
8 LED’s one colour 4 LED’s two colour 2 LEDs RGBW
Either Positive / Negative Dim & control RGBW On/Off/Dim… Colour-Change… fuse-less. 2 LEDs or White + colour controlled by One Button
Full technical information
STAR-Switch - Optional Engraved Custom Buttons
STAR-Switch is an IP67 robust 8-Button Switch Block. Built to withstand the toughest conditions. Compact Design: 105x 63x 16mm. Multi-Function Buttons: Single press for one channel, hold to dim. Double press to switch LED to a second colour or RGBW channel.
Operates STAR-light with CAN. Backlit press tactile buttons Tri-Color LED for On/Off/Fault.
Full technical information
HAGER WBSP2XS-MB SILHOUETTE SERIES GPO
DoublePowerpoint, Switchplug Combination, With Extra Switch, Single Pole, Flush, Horizontal, 250V 10A, 3 Pin, Matt Black The additional button is wired as the Remote ON/OFF button for the Inverter.
AC Inlet
12V Circuit Breakers
C16 MCB & RCBO
12V Ports
12V Fridge
High Power
STAR-Light Breaker
Cigarette Lighter
Dual USB
USB C USB
250A Amphenol Connectors
50A Anderson plugs
50A Anderson plugs
Solar
Fridge
HighPower
Battery Negative
Starter Battery
Aux Battery
8
WWW.SAFIERY.COM
VICTRON CERBO-S GX
The Cerbo-S GX is a powerful member of the GX product family with extensive communication ports and the option to add a touchscreen display for extended functionality. GX products are Victron's state-of-the-art monitoring and control solution that run our Venus OS operat- ing system. It sits at the heart of your energy installation. All the other system-components such as inverter/chargers, solar chargers, and batteries are connected to it. The Cerbo-S GX ensures that they all work in harmony. To monitor and control your system, you can simply access it remotely via our Victron Remote Manage- ment (VRM) portal from anywhere in the world using an internet connection. Or access it directly, using the optional GX Touch screen, a web browser, a Multi-Functional Display (MFD) [92] or our VictronCon- nect app. The Remote Console [46] serves as the primary control center for monitoring, controlling and managing your system. The Cerbo-S GX also provides VRM: Remote firmware updates and allows settings to be changed remotely.
9
WWW.SAFIERY.COM
Tank levels can be monitored at various locations within the GX environment: • Device List of the GX device • Sensor overview menu of the GX device • Graphical overview of the GX device • VRM Dashboard • VRM advanced menu widgets • VRM App widgets
Wireless Bluetooth Ruuvi temperature sensors The Ruuvi sensor features temperature, humidity and atmospheric pressure streamed wirelessly to the GX device via Bluetooth. To connect the Ruuvi sensors to the GX device via Bluetooth, the GX device needs Bluetooth functionality. Some GX products already have built-in Bluetooth, all others can easily be retrofitted using a standard USB Bluetooth adapter (see the Victron GX product range overview for GX products that have built-in Bluetooth). However, an additional USB Bluetooth adapter, also for GX devices with built-in Bluetooth, allows for limited relocation of the Bluetooth radio (via a USB cable extension) close to other supported Bluetooth devices that might not otherwise be reachable.
External USB Bluetooth adapters that have been tested and known to work:
Installation procedure Make sure that Bluetooth is enabled in the Bluetooth menu (enabled by default). Go to the Settings → I/O → Bluetooth sensors menu and then click Enable to enable Bluetooth temperature sensors. The Ruuvi sensors come supplied with a removable plastic pull tab. This prevents it from discharging while on the shelf. Pull out the plastic tab and the unit will start transmitting its temperature information.
10
WWW.SAFIERY.COM
The sensor should appear in the menu, "Ruuvi ####" - with a 4 hexidecimal device ID, enable the specific Ruuvi sensor. The Bluetooth adapters submenu displays a list of available Bluetooth adapters. The menu option Continuous scanning permanently scans for new Bluetooth sensors. Note that this option affects the WiFi performance of the GX device. Only enable this option if you need to search for new Bluetooth sensors. Otherwise, leave this option disabled.
Using VictronConnect via Bluetooth If you are just getting started for the first time with VictronConnect, you may wish to begin with the VictronConnect manual. 1. Download the latest version of the VictronConnect app onto your Bluetooth compatible device (phone or laptop), and make sure that Bluetooth is enabled. 2. Make sure the Cerbo-S GX is powered on and the Bluetooth LED is blinking. 3. Open the VictronConnect app within 10 meters of the Cerbo-S GX and wait for nearby devices to be discovered. 4. Once discovered, click or tap on the Cerbo-S GX. 5. On first connection you will be asked to enter a Bluetooth PIN code. The default PIN code is 000000. 6. For GX devices that use the default PIN code, you will then be asked to change this insecure default PIN code to a more secure unique code. Please set your unique code, and then put it in a safe place for passwords in case you forget.
11
WWW.SAFIERY.COM
From the main device screen it is possible to change the network and ethernet settings, enable or disable the built-in WiFi Access Point, view the system on VRM, or open the Remote Console (requires a WiFi connection to a local network or the access point of your GX device). For the network settings, tap or click the cog wheel icon.
12
WWW.SAFIERY.COM
Instruction video Watch the step-by-step instruction video on how to connect to a GX device using the VictronConnect app
13
WWW.SAFIERY.COM
14
WWW.SAFIERY.COM
STARLIGHT SETUP
Connect your cables to the Wagos through the gland.
Remove the duct lid
STARLIGHT PROGRAMMING
safiery.com/product/star-light-wireless-and-wired-4-channel-led-controller
SCAN
LED BACKLIGHT OPERATION
The light can be turned on/off using the 50A High Power breaker switch.
High Power
15
WWW.SAFIERY.COM
STAR-Light MANUAL
There is an excellent Youtube Video on programming Starlight
or scan the QR Code
Go here: https://youtu.be/LZ-ResWF8OE
16
WWW.SAFIERY.COM
17
WWW.SAFIERY.COM
Suggested Channel
Guide Notes
Single Colour LED Light Items to be Switched
If Dimmable on negative use negative channels, if positive use positive channels
Current per channels limited to 48W DO NOT USE FOR FRONT LIGHT BAR OF WORK LIGHTS > 48W Use relay driven by vehicle dimming control and switch if required in cab. Do Not use STAR-Light. Maximum power all lights on at same time is 10A on negative and 10A on positive. 10A = 120W Multiple RGBW strips can be combined provided the maximum load when all turn on is < 48W No direct power connection Common use is ARB Dual Stage Intermittent use on positive channel Reason is there is too much risk someone accidentally turn fridge off on switch and ruins all the food.
1
Front Light Bar
None
2
Side Work Lights
As per item 1 if less then 48W.
3
RGBW Light FRock lights
As per item 1
As per RGBW Setup
4
Compressor Single Stage Compressor Dual Stage
Channels 3.4.5 or 6 But ONLY to a relay Channels 3.4.5 or 6 But ONLY to a relay
5
6
Water Pump
Channels 3.4.5 or 6 But ONLY is less then 7A
7
Fridge NEVER use STAR-Light, always wire direct to fridge. Jupiter has dedicated Anderson plug on rear for up to 3 fridges Travel Buddy Oven Either use: Channels 3.4.5 or 6 But ONLY to a relay OR
8
Use High Power Anderson at back of Jupiter Case and don’t run oven at same time as compressor.
9
10
Fans
Channels 3.4.5 or 6
Power less then 48W
Other 12V devices
Channels 3.4.5 or 6
Power less then 48W
11
18
WWW.SAFIERY.COM
STAR-Tank RADAR BLUETOOTH SENSORS
STAR-Tank sensor support has been added to Venus OS. These radar sensors use BLE (Bluetooth Low Energy). This wireless technology allows devices to be networked within a range of about 40 meters (with Bluetooth Adapter), while consuming significantly less power than ordinary Bluetooth technology. The expected battery life is 5 years with tank measurement averaging 50%. Battery life is less at around 3 years if tanks average 10% level for example. STAR-Tank sensors feature phased co-herent radar sensing for non-pressurised tanks. They suite black water tanks, even with foam above the liquid line. The sensors are attached to the top of the tank. The liquid level, temperature and sensor battery voltage are streamed wirelessly to the GX device.
STAR-Tank reports at 60 second intervals. Pressing the button on top of STAR-Tank accelerates the reporting to a 10 second interval for 10 minutes. This is to aid commissioning. It also confirms the radar functionality is operating with a quick flash of the LED around the button. The radar sensor is approved with FCC for USA and is CE and UKCA approved. The temperature value can be used to trigger the temperature relay function on the GX device with relays to initiate stirrers of heaters in tanks as well as notification of this. To connect STAR-Tank sensors to the GX device via Bluetooth, the GX device needs Bluetooth functionality. Some GX products already have built-in Bluetooth, all others can easily be retrofitted using a standard USB Bluetooth adapter (see the Victron GX product range overview for GX products that have built-in Bluetooth). However, an additional USB Bluetooth adapter, also for GX devices with built-in Bluetooth, allows for limited relocation of the Bluetooth radio (via a USB cable extension) close to other supported Bluetooth devices that might not otherwise be reachable. USB Bluetooth adapters that have been tested and known to work:
19
WWW.SAFIERY.COM
20
WWW.SAFIERY.COM
WIRING DIAGRAM
STAR-Light OUTLET x10
HIGH POWER 12V OUTLET
AUX BATTERY
STARTER BATTERY
AC IN
21
WWW.SAFIERY.COM
SAFETY INSTRUCTIONS
22
WWW.SAFIERY.COM
INSTALLATION
23
WWW.SAFIERY.COM
OPERATION, CONFIGURATION AND MONITORING
24
WWW.SAFIERY.COM
25
WWW.SAFIERY.COM
26
WWW.SAFIERY.COM
27
WWW.SAFIERY.COM
28
WWW.SAFIERY.COM
29
WWW.SAFIERY.COM
30
WWW.SAFIERY.COM
31
WWW.SAFIERY.COM
32
WWW.SAFIERY.COM
MANUFACTURER`S WARRANTY
Manufacturer’s Warranty period to the original purchaser for these periods of time from the date of purchase: “VICTRON” products: 5 years from the date of purchase for all electronic products excluding Victron batteries* “METEOR” (Safiery 48V Lithium Batteries with Safiery software) products: 3 years from the date of purchase for Lithium Battery Products that are installed in a “NON-CANbus” controlled environment and charged using bulk/absorbtion and float voltage settings. 5 years from the date of purchase for Lithium Battery Products that are installed in a “CANbus” controlled environment WITH Victron charging and CANbus control of charging devices and these devices charge the batteries based on the CANbus commands from the Dyness Lithium battery. Access must be given to Safiery Pty Ltd to the Victron “VRM” (Victron Remote Management) to verify the correct installation of the CANbus configuration and operation. “SIMARINE” products: 3 years from the date of purchase* “SAFIERY” sensors, electronic and electrical products: 2 years from the date of purchase* “SAFIERY LITHIUM BATTERY” : 3 years from the date of purchase Lithium chemistry degrades because of Chemical Ageing: Time: With acceptable charging and discharging, even with CANbus control, approximately 2-3% of the battery nominal capacity degrades every year in a cumulative effect. Without CANbus control, this percentage may be double. This is not warranty. Cycling with deep discharge: Deep discharges over 80% will accelerate Chemical Ageing. Deep discharges of 90-100% require immediate battery recovery for continued operation. A deep discharge left unattended is not warranty. Elevated temperatures: A fully charged Lithium Battery stored at around 40°C loses approximately 30-35% of its capacity in a year without being used. This is not Warranty. Stored at high State of Charge: A fully charged Lithium Battery stored at around 90-100% State of Charge loses approximately 15-25% of its capacity in a year without being used. This is not Warranty. Higher Capacity chargers than specified and higher capacity discharges than specified are harmful and reduce battery life to half.
More info about warranty: safiery.com/warranty
33
WWW.SAFIERY.COM
CONTACT / SUPPORT
GET IN TOUCH QLD HQ: 45/8 Distribution Court, Arundel QLD 4214 +61(07) 2102 25 53 service@safiery.com
SOCIALS Instagram.com/safiery.global youtube.com/@Safiery
THE 3 MOST COMMON CALLS ARE: 1. Flattened our batteries - use solar to recover to minimum voltage. Only use 240V AC power after reaching minimum voltage. 2. AC Inverter/Charger will not charge. Usually because the AC In line has an earth fault on the supply side and Safiery systems will not charge unless there is a properly connected earth AND the Active power in is wired correctly at the power supply. Common on farm stays. 3. Inverter not working. Usually because it is switched to "Charge Only" and it will not operate as inverter. Simply switch to "on" position.
© Copyright Safiery Pty Ltd 2023
34
WWW.SAFIERY.COM
Page 1 Page 2 Page 3 Page 4 Page 5 Page 6 Page 7 Page 8 Page 9 Page 10 Page 11 Page 12 Page 13 Page 14 Page 15 Page 16 Page 17 Page 18 Page 19 Page 20 Page 21 Page 22 Page 23 Page 24 Page 25 Page 26 Page 27 Page 28 Page 29 Page 30 Page 31 Page 32 Page 33 Page 34 Page 35Powered by FlippingBook