The sensor should appear in the menu, "Ruuvi ####" - with a 4 hexidecimal device ID, enable the specific Ruuvi sensor. The Bluetooth adapters submenu displays a list of available Bluetooth adapters. The menu option Continuous scanning permanently scans for new Bluetooth sensors. Note that this option affects the WiFi performance of the GX device. Only enable this option if you need to search for new Bluetooth sensors. Otherwise, leave this option disabled.
Using VictronConnect via Bluetooth If you are just getting started for the first time with VictronConnect, you may wish to begin with the VictronConnect manual. 1. Download the latest version of the VictronConnect app onto your Bluetooth compatible device (phone or laptop), and make sure that Bluetooth is enabled. 2. Make sure the Cerbo-S GX is powered on and the Bluetooth LED is blinking. 3. Open the VictronConnect app within 10 meters of the Cerbo-S GX and wait for nearby devices to be discovered. 4. Once discovered, click or tap on the Cerbo-S GX. 5. On first connection you will be asked to enter a Bluetooth PIN code. The default PIN code is 000000. 6. For GX devices that use the default PIN code, you will then be asked to change this insecure default PIN code to a more secure unique code. Please set your unique code, and then put it in a safe place for passwords in case you forget.
11
WWW.SAFIERY.COM
Powered by FlippingBook