o For example, at a 0.33C rate, the discharge capacity is about 53Ah for both cells, and at 3C, it's still about 51Ah. This suggests a small drop in capacity as the discharge rate increases, but the cells maintain most of their capacity under higher loads. 2. Capacity Retention (%): o The capacity retention is quite high across all discharge rates, generally ranging between 95.43% and 100%. This is a strong indicator of the cells' ability to retain their capacity during high-rate discharges, which is crucial for long-term performance, especially in high-power applications like electric vehicles or energy storage systems. o The retention starts to dip slightly at higher discharge rates, but it’s still well within a range that suggests good overall performance. 3. Discharge Energy (Wh): o The discharge energy (Wh) is slightly lower for higher discharge rates (3C), which is expected due to the increased heat generation, but it remains fairly stable considering the rate. This means the cell is relatively efficient at higher rates and isn't losing excessive energy in the form of heat. 4. Average Voltage (V): o The voltage remains quite stable across the discharge rates. There’s a slight decrease in voltage as the discharge rate increases, but again, this is typical in lithium-based cells under higher loads. o The voltage drop is minimal and doesn’t significantly impact the overall performance of the cell. 5. Temperature Rise (°C): o The temperature rise is the most critical factor in determining the cell's thermal management capabilities. o At a 3C discharge rate, the temperature rise is relatively controlled, with Sample 5 reaching a peak of 11.6°C and Sample 6 reaching 11.0°C. o The cells' ability to maintain a relatively low temperature rise even under high discharge rates indicates good thermal management, which is essential for safety, longevity, and performance under demanding conditions. Overall Impressions: • High Discharge Rate Performance: The cells show robust performance at higher discharge rates (up to 3C), with only a minor drop in capacity and a reasonable temperature rise, making them suitable for applications requiring higher power output. • Thermal Efficiency: The moderate temperature rise suggests that the cells are well-designed for power- hungry applications without significant risk of overheating or thermal runaway, which is crucial for safety. • Retention and Efficiency: The high capacity retention and relatively stable energy output across discharge rates suggest that the cells have a long operational life and are efficient even under stress. In conclusion, the performance looks strong, especially considering the minor drop in capacity and the good thermal behaviour. These cells should perform well in applications requiring high power output, such as electric vehicles, marine, or industrial power storage systems.
Powered by FlippingBook