This interactive publication describes the Safiery STAR-switch Exterior
“Travel the World, Live in a World, Without Consuming the Earth”
STAR-switch Exterior SKU: KEY0867001
• Robust 8-Button Switch Block. • Rubber Encapsulated Surface gives enhanced durability and user comfort. • IP67 sealing makes it built to withstand the toughest conditions. • Backlit press buttons are easy to operate because of their generous size and tactile feel.
• Adjustable Brightness: Dimmable LED indicators for optimal visibility. • Reliable ConnecJon: Features a Deutsch plug 4-pin connector on the rear. • Secured by 2 x M6 bolts When used with Safiery STAR-power or STAR-light Modules • Each buSon can be in parallel to 6 way switching • Press buSon once for one channel, hold to dim. Double press same buSon and LED can be switched to second colour or RGBW channel. Personalize your switch block with custom engraving of each button. This is an additional price with conditions. Engraving can be
ordered on-line as text with up to two lines of 10 characters. There are no icons in this service, it is text only. Payment is captured with online order. It is a computerised process. See examples. Note: Once ordered, it can’t be changed by phone calls or emails. Go here: https://safiery.wufoo.com/forms/qojwpx0n69l93/
Power Supply
9-36V DC
Quiescent Power
<5w
Opera=ng Temperature Storage Temperature Opera=ng Humidity
-30°c~ + 75°C -40°c~ + 85°C
5%~9o%
Communica=on
CAN 2.0A/B
Dimensions Waterproof
105*62.5*15.8mm
IP67
Pin 1 Pin 2 Pin 3 Pin 4
Vcc
9-36V DC Nega=ve
Gnd
CAN Hi CAN Lo
CAN H
CAN L CAN data details available upon ordering. 250 baud Garmin compa=ble with Empirbus
Safiery Pty Ltd ABN: 87 624 588 807 45/8 Distribu=on Court, Arundel QLD 4214 (07) 210 22 55 3 safiery.com sales@safiery.com
SAFIERY STAR-SWITCH EXTERNAL Protocol
This document describes the CAN communication protocol for the CAN button operation panel. The key arrangement and corresponding key number (from A1 to B4 respectively) are shown at right: CAN protocol Refer to CAN2.0B Baud rate ： 250kBit/s Identifier ： 11bit （ Standard frame ） Description: All information in 8 bytes, BYTE0-BYTE 7, multibytes composition data low bytes first, high bytes behind Send a message (key-press message) Identifier: 0x007 (default) Cycle: During power-up, the operation panel is always sent at a 100ms cycle, but immediately when the data changes (key status changes). data:
ID
Byte0 Bit0:A1 Bit1:A2 Bit2:A3 Bit3:A4
Byte1 Bit0:B1 Bit1:B2 Bit2:B3 Bit3:B4
Byte2 0xFF
Byte3 0xFF
Byte4 0xFF
Byte5 0xFF
Byte6 0xFF
Byte7 0xFF
0x007
Description: If the value of the key when the key is pressed, the value of the key is 0. 4 Receive message (indicator light message) Receive the controller data and control the corresponding indicator light according to the received data. Identifier: 0x008 (default) period: 100ms Data: The indicator light receiving the CAN bus data control keys A1 to B4 is turned off
ID
Byte0
Byte1
Byte2
Byte3
Byte4
Byte5
Byte6
Byte7
0x008
Bit0:A1.
Bit0:A3.
Bit0:B1.
Bit0:B3.
1
1
1
1
Bit1:A1.
Bit1:A3.
Bit1:B1.
Bit1:B3.
2
2
2
2
Bit2:A1.
Bit2:A3.
Bit2:B1.
Bit2:B3.
3
3
3
3
Bit3Bac
Bit3: No definitio
Bit3:No definitio
Bit3: No definitio
klight
control enablin
n
n
n
Bit4:A4.
Bit4:B2.
Bit4:B4.
g
1
1
1
Bit4:A2.
Bit5:A4.
Bit5:B2.
Bit5:B4.
1
2
2
2
Bit5:A2.
Bit6:A4.
Bit6:B2.
Bit6:B4.
2
3
3
3
Bit6:A2.
Bit7: No definitio
Bit7: No definitio
Bit7: No definitio
3
Bit7:nc
n
n
n
data Note: 1. If the value of the corresponding bit in the data is equal to 1, the light is on; if the value is equal to 0, the light is out. 2. When the "backlight control enable" is 1, the "backlight control data" is effective, 1 backlight, 0 backlight out
CAN key panel function setting The communication node number and port rate of the CAN keyboard are set by the CAN bus data. When setting the CAN panel, the ID number is fixed to 0x7FF and the data format is as follows:
CAN panel function setting the data format The setting parameter (BCDE) exceeds 10 when setting the port rate is invalid; ID number (BCDE) exceeds 0x7FF when setting the standard frame; invalid ID number (BCDE) exceeds 0x1FFFFFFF when setting the extended frame; and invalid BCDE is not 0 or non-0 xFF when setting the power button function. When the setting of node, port rate parameters and power button function meets the requirements, the
parameters will take effect immediately after the setting. Uploading of the system parameter information
In 1S before the panel is powered on (A1-2 indicator light), the CAN key panel sends the system parameter information through 0x7FE at a baud rate of 250 Kbit/s, the specific format is:: CAN Key-press panel system information
ID
Byte0
Byte1
Byte2
Byte3
Byte4
Byte5
Byte6
Byte7
0x7FE
Hardware version number (Low in front, high in back)
Software version number (Low in front, high in back)
0xFF
0xFF
0xFF
0x20 （ or der number ）
CAN the Key panel sets the parameter information ID Byte0 Byte1 Byte2 Byte3 Byte4
Byte5
Byte6
Byte7
0x7FE
0x21(or der number)
Porter rate serial number (Low in front, high in back)
Receive d data ID1 type
Data ID1 (low before, high first) ）
Receiving data ID type value =0: standard frame format; =1: extended frame format. 0x7FF data is sent by serial number 0-1 for 100ms. 。
Page 1 Page 2 Page 3 Page 4Powered by FlippingBook