Tomorrow’s Technology Today ™
NMEA 2000 Output Amsuol tfi fNuonvc et imo nb edri s2p0l 2a y5s, Sf rToAmR -GTaarnmk i nd ,a Rt aa yc amnaar li snoe ,oSui tmp ruat dt ,oaNn Md oE tAh e2r0s0. 0C onnent we cot rSkTs Af oRr Tdai snpkl at oy So Tn A R Switch Custom (Safiery’s Input Module) and NMEA backbone, and tank data flows to most MFD’s. 1.5 Energy-Based Automation TS Th Ae Rr eCaol nptorwo lel er rosf cVainc ter oc no ni nt rt oe lgl readt iuosni negmNeOr gDeEs Rwehde ni nyVoiuc tcroomn bVienneusswOi St c ahni ndgr we ai dt hseyns teermg y sat wa t ae rfernoems s . devices and react automatically. Available Triggers When connected to a Victron system and implementing NODE Red, STAR Controllers can monitor: Data Point Source Example Use Battery SOC BMV, SmartShunt, BMS Dim lights below 40% SOC Battery Voltage Any Victron device Emergency load shed at 11.8V Charging State MPPT, Charger, Inverter Enable water heater when bulk charging Shore Power Status Inverter/Charger Switch to low-power mode when off-grid Solar Yield MPPT Boost charging when solar exceeds 200W Generator Running Cerbo GX Enable high-draw appliances Example Automations (Showing logic. Node red uses function blocks) Low Battery Load Shedding:
IF Battery SOC < 30% THEN Set Channel 8 (Water Heater) OFF AND Set Channels 1-6 (Cabin Lights) to 40% Shore Power Connected: IF Shore Power = Connected THEN Set Channel 12 (Battery Heater) ON AND Enable Mode "Full Comfort" Solar Surplus Management: IF Solar Power > 400W AND Battery SOC > 80% THEN Set Channel 9 (Water Maker) ON Overnight Anchoring: IF Time = 22:00 AND GPS Speed < 0.5 knots THEN Enable Mode "Night Watch"
Safiery Pty Ltd 45/8 Distribution Court, Arundel 4214, Australia https://safiery.com | +61 7 210 22 55 2 Touch out Chatbot for contact
Powered by FlippingBook