Scotty AI V3 and the Hybrid Alternator or BMG

Requires Scotty AI V3 3000W or 1500W Model to Operate. Sold in together. International Patent Applies PCT/AU2023/050926

Bidirectional Motor Generator 48 V Bidirectional Motor Generator is combined with Scotty AI V3 to produce very high power from a compact design because of high efficiency using permanent magnets and inverter technology. There are more than 10 combinations of power distribution with 12V, 24V and 48V charging. This results in high replenishment power for the mobile lifestyle.

Mounts as a second “Alternator” in parallel to factory 12V or 24V.

Off the shelf N62 frame to fit Mercedes Benz Sprinter.

Scotty AI V3 ensures 48V lithium battery is safely charged. Any 48V battery can be used if it has “stop charge”. In combination can charge two different 48V Lithium banks or one 24V bank and one 48V bank. Can replace Factory Alternator for some vehicles/marine engines. DC DC charging of 12V or 24V Starter battery.

Exceptionally high output at engine idle typically > 2,000W.

SHSA4802 requires Scotty AI V3 40 to 58 V and 240A ; Scotty AI V3 20-58V 3000W or 1500W

Nominal operating voltage and Current

Generator performance depends on environment temperature

peak: 10.0 kW Continuous hot environment: 5.5 kW to a

Generator & Scotty AI V3 with 12V 250A+ Factory Alternator

Add another 3kW to above values with 8.5kW minimum

Efficiency

Peak: ≥85%

Max operational speed

12000 rpm with 2.7:1 pulley engine 4,500 rpm

48V Battery Requirements

Victron Compliant CAN BMS or if no CAN, stop charge output.

CAN 250baud, Victron VE.CAN compatible same Victron bus.

Communication

Generator Technology

Hybrid Excitation Synchronous combines permanent magnet field stator excitation

Software Configuration & Control

Scotty AI V3 Patented Protection and auto-tuning. Use of Smartphone App on WiFi.

Motor: IP25 Inverter: IP6K9K

Motor overall protection

-30 C ~ 105 C

Nominal operating temperature

Cooling type

Air (double fan inside generator, fins on Scotty AI V3 3000)

Diam ≤ 150mm Length ≤ 150 mm (without shaft and pulley) Sprinter Model ≤ 7.3 kg; Other Models ≤ 8.5 kg

Dimensions

Weight

Note : All data are based on Safiery test procedures. Actual performance may vary according to local conditions

Copyright Safiery 2025 Software Perpetual Licence granted by Safiery Pty Ltd Additional Licence available for Mild Hybrid Operation Made in Australia

safiery.com tap on chat bot

Safiery Pty Ltd, 45/8 Distribution Ct, Arundel 4214 Australia +61 7 210 22 55 2 ABN: 87 624 588 807

Powered by