Simarine and Sensor Wiring Manual

6 STS01 WATERPROOF EXTERNAL TEMPERATURE Description Technical Specification

STS01 Temperature Sensor is Epoxy resin wrapped NTC sensor connects with insulated wire. It is waterproof with moisture protection, good insulation, high reliability, and sensitive response. The stainless steel braided sheath is durable and the sensor can work in the high temperature environment. This high quality sensor is designed for monitoring the temperature of the shock absorber. It works with Simarine Monitoring System and Smartphone App. Alerts can be sent if the temperature exceeds or drops below a preset level. The Temperature Sensor is especially critical for boaters and RV relying on heating and cooling systems in extreme climates.

Performance

Recommended application Shock Absorber Protection level

Waterproof & Heat resistant

Probe type Stainless steel probe Probe size 4 x 90 mm Length of wire 2 m stainless steel braided cable Output 2 wires

Electrical Characteristic

Supply voltage 12V DC Measurement range 0 – + 250 °C

Type NTC 50k ±1% 3950

B-constant

3380K -/+ 1%

Typical Dissipation Constant 5mW/ °C Probe insulation >100MOhm Peak voltage sustain time 2 seconds, AC1800V 1mA 2 seconds Stress sustain 9.8N (1kgF) for 1 minute no deformation