15 SLPG01 ULTRASONIC LPG TANK LEVEL SENSOR Description Technical Specification
SLPG01 Ultrasonic LPG Tank Level Sensor with analog voltage output adopts the acoustic reflection principle of the LPG tank level through a special conductive elastomer couplant to the metal LPG tank. It uses a circular rare earth magnet to attach to the under-face (bottom) of the LPG tank. Fitted between the Acoustic sensor and the tank is the special conductive elastomer couplant material. Inside the ultrasonic housing is a calibrated thermistor. The system sensor uses special ultrasonic processing technology. The echo signals are detected by the probe after being reflected back from the liquid surface. The echo signal is processed by the proprietary algorithm and the time is calculated. The system calculates the level of LPG according to the formula. There is no special requirement on the tank size. Installation 1. The sensor needs to be placed in the centre at the bottom of the LPG Tank. Please make sure there is no loose paint or debris at this point. 2. Clean the bottom surface of the LPG tank. If the metal tank has a thick or over- painted coating, the surface of the detecting point has to be clean and polished. 3. Place the couplant pad between the sensor and bottom of the tank. 4. Fit the alloy housing and magnetic ring to bottom of LPG tank. This is a strong connection which compresses the couplant material. 5. Check that the LED is flashing, as this confirms that it is good connection.
Performance Recommended application Water Tank IP68
Measurement mode Non-contact
Length of wire 2000mm
Size (LxWxH)
50x50x20 mm
Work temperature - 15 – +60 °C
Storage temperature - 25 +80 °C
Electrical Parameters
Working voltage 10-36V DC
Average current
<25mA
Blind zone ≤50mm
Measuring height of LPG level Accuracy (normal temperature)
50-1,000mm
Response time (with water)
2s
± 4%
Output mode Analog voltage
Resolution 1mm
Center frequency
2mHz
ESD ±4/±8KV
LED indicator light instructions
Slow flash LED flashes every second for valid couplant engagement
Electronic Wire Connections
Red 12V power to sensor Yellow Signal Output
Black GND signal output/temp White Temperature
COUPLANT
CIRCULAR MAGNETIC MATERIAL
TEMPERATURE SENSOR
ULTRA SONIC DEVICE (AE)
COPYRIGHT © SAFIERY PTY LTD ALL CONCEPTS IMAGES AND TEXT IN THIS EBOOK ARE SUBJECT TO COPYRIGHT
Powered by FlippingBook