Simarine and Sensor Wiring Manual

28 SCP01 CABIN PRESSURE SENSOR Description Technical Specification

SCP01 cabin pressure sensor made to be highly accurate with a high stability, pressure sensitive Micro-chip. It has strict precise temperature compensation, linear compensation, signal amplification, V/I conversion, reverse polarity protection, current limiting pressure overload signal Processing. It will operate with very small pressure, flow and other parameters. The transducer is especially suited to measuring cabin pressure in the range of 0-100Pa.

Parameter

Pressure range 0-200pa, Gauge

Measuring medium air

Signal output

0-5V

Power supply

12V DC

Overload 200%.F.S

Burst Pressure 300%F.S

Accuracy (Linearity hysteresis repeatability)

≤ ± 0.5%.F.S

Long stability

0.2%F.S ± 0.05%

Working Temperature -30°C~80°C

Storage temperature -40°C~85°C

Zero temperature drift

0.03%.F.S/°C

FS temperature drift Pressure connect port

0.03%.F.S/°C

Housing material

Alloy

Open

Insulate resistance >100MΩ @100V

Response time ≤4ms

Electronic Wire 3 Wires

Electronic connection Directly cable IP65

IP65 (except air inputs)

Water Proof

Cable specs

1m PE cable

Certificate approving CE Certificate

Water Proof

IP65

Dimension and Drawing (mm)

Electronic Wire Connections

Red Power Supply + Yellow Signal Output + Black Ground & Shield Wire

Green Power Supply - Green Signal Output -