Max Bat Amps : < WHOLE NUMBER (0 2000) > If set, this will be the maximum amperage allowed to flow into the battery. Remember, this value is set relative to the 12v/500A ‘nominal’ battery and it is also adjusted by the Battery Capacity Multiplier; so a value of 250 would cause the regulator to limit charging current to a 0.5c rate. Set = 0 (default) to disable Max Battery Amps
$CPR:n - RESTORES Charge Profile ‘n’ to default values Restores to default (values at compile time) Charge Profile Entry ‘ n ’. After entry ‘ n ’ is restore, the regulator will be restarted automatically.
$CPR:n
n: (7 8) ‘ n’ is the Charge Profile Table Entry that will be restored. Use range 7 to 8.
36
Powered by FlippingBook