$SCN: - Changes NAME (and PASSWORD) Update Name and Password configuration. The name is used by the CAN subsystem to identify this regulator.
$SCN: <RESERVED>, < Reg Name >, <Reg Password>
RESERVED <WHOLE NUMBER (0, or 1)> Set = 0;
Reg Name:
<STRING (up to 18 characters, no spaces, comma, or ‘@’) > Name used for CAN ID. If you have
twin engines, you might wish to set these to descriptive names.
Reg Password:
<STRING (up to 18 characters, no spaces, comma, or ‘@’) > .
$SCN: will reply with “AOK;” if the command was processed successfully. However, to assure the changes are STORED and used the regulator must be reset using the $RBT: command after all changes have been made.
$SCN: will not be recognized if system has been locked-out via the $SCO: command.
53
Powered by FlippingBook