Overview
3.
A - 2 SiCom, 1 SiCOM Panel
B - resistance inputs
C - voltage inputs
D - 4 stage level 2
E - 4 stage level 1
F - main and starter battery
G - manual main switch
H - solar charger
I - charger
J - inputs and outputs
K - common ground
Installation
4.
4.1 Mounting
CAUTION: Install the power unit in a clean and dry place protected from accidental spilling of liquids. Remove the shunt cover by unscrewing two screws on top of the power unit cover. To install the power unit using supplied voltage cables find a place no further than 3 m away from the battery/battery bank. You can fix the power unit with the supplied screws using four holes (two on each side) on bottom of the casing.
4
Powered by FlippingBook