$CCR: - RESTORES CAN Configuration to default
Restores CAN Configuration values to original as-compiled (default).
$CCR: will reply with “AOK;” if the command was processed successfully. However, to assure the changes are STORED and used the regulator must be reset using the $RBT: command after all changes have been made.
$CCR: will not be recognized if system has been locked-out via the $SCO: command.
$MSR: - RESTORE all parameters to factory default.
Restores all configurable parameters to the factory default values. This is a combination of the $SCR: , $CCR commands, the $CPR:n commands for all Charge Profile Entry tables, and $RBT; command. Alternator will RESET after this command is completed.
$MSR: <Password>
Note $MSR is disabled if the Regulator has been locked out via the $SCO command. If successful, the regulator will reply with “AOK;” and then reboot.
Password:
<STRING (up to 18 characters, no spaces, comma, or ‘@’) > Optional Password may be supplied
to clear a level 1 lockout.
$MSR: will not be recognized if system has been locked-out (level 1) via the $SCO: command unless the correct devices password is supplied. Note that a lockout level 2 is not clearable, even if the correct password is supplied.
64
Powered by FlippingBook